Desire a Highly Detailed Model Train Layout Like Above?
Missing out on the top 5 most important model train construction tips will cost you large amounts of money, time and cause massive frustration from having to redo the same parts of the layout over and over again due to screwing it up. The 5 concepts are fundamental to building a layout you can be proud to show off to friends and family.
Any real model railroader would be able to notice if a model train layout is built using the correct process of steps or if it’s just built on the fly. Model train enthusiasts that are looking to build his or her first layout or take their existing model railroad to the next level in terms of design, detailing and above all creativity should try to listen to the advice below.
Top 5 MUST KNOW Model Railroading Construction Tips to Help Avoid Derailments, Erratic Stops and Costly Building Mistakes
-
- You always want to make sure to cut your track length a bit longer than needed, so you can always trim it if it’s too long. It’s just like a haircut, if you cut too much off the first time, it’s going to be more difficult fixing it. If the track is too short, you’ll end up having to do some creative work to ensure your model train can run across the track smoothly. This usually costs time and money so avoiding this entirely is ideal for you.
- Try to avoid combining several different pieces of the track into your overall trackwork. It may seem like a good idea but more times than not, you’ll end up having to replace the entire network of track pieces and purchase one type of trackwork to ensure your trains run smoothly without derailments.
- When building a section of your layout, try your best to do it right the first time around. If you try not to spend enough and just use random model train accessories that you’ve got laying around it most likely won’t work and will end up costing you more in the long run. Spend a little bit extra time to save yourself time in the future.
- One of the biggest mistakes most model railroaders make is not testing the track before securing it in place. To test it, try to hammer in a few track nails to secure it enough to ensure that the model trains run smoothly on the track. Once you’ve ensured it is running smoothly, then use either glue or track nails to finish the trackwork.
- When starting a new layout, plan it out completely before constructing it. For example, when building a switching layout, try to use track software first to ensure everything fits nice and perfectly.If you don’t plan it out the first time, you’ll end up spending more time and money fixing problems and buying the same items over again due to messing it up the first time.
Using free model train layout planning software before constructing your first layout can help you avoid having to re-do your layout plus it will help you ensure that your trains run smoothly before ever laying down track work.
Besides avoiding derailments, what are some other things to keep in mind?
- Buying a starter set will give you everything you need right out of the box and it will be more cost effective than buying individual items. Your starter set should include the command station, booster, and throttle. Some sets combine the command station and booster together.
- Choosing which DC / DCC brand to use is very important. Usually, the command stations and throttles are not interchangeable between manufacturers. Make sure the brand you choose offers up-gradable systems that allow it to grow with your needs. Also, try to find a brand that allows for computer inference to use in the future for computer automated signals; automation and even programming sound decoders.
- Find a brand that employs a full-featured throttle network
Any other helpful pieces of advice?
- Make sure you have the right tools for the job, especially for locomotives, rolling stock and assembling things. A nice set of files and a small hand drill for insanely small drill bits.
- You always want to have screwdrivers to prevent from you stripping screws due to lack of proper screwdrivers.
- Try new things in small sections and if it looks good and works out in that small section of the layout then incorporate it into your entire layout.
- If I had known about this in the first place, it would have prevented so much time, money and frustration in the long run.
Need help answering any of these questions?
- How do I build sturdy benchwork for any scale layout?
- Learning track work includes gauges, turnouts, and track cleaning plus more, where can I get all of this information in one place?
- How to decide on wiring, rolling stock, scenery, structures, painting and track operations such as switching tracks?
Model trains is not necessarily an expensive habit but beginners who fall prey to the standard trial and error format of learning how to build model train layouts end up losing motivation due to the costs of making errors.
Especially when it comes to learning the fundamentals, Do not go down this route…spend a few bucks on a guide that will save you hundreds of dollars in the near future. This is the secret that will put you ahead of any other model train beginners and save you time, money and a whole lot of frustration.
Next, learn detailed step by step directions on the following:
- Starting a model railroad
- Techniques for hand-laying track at a reasonable cost
- Competitive Equipment Comparisons
- Wiring your railroad with DCC
- Re-motoring DC engines and installing decoders
- Making scenery and backdrops
- Kit building and weathering models
- Handling common track features – turnouts, reversing loops
- Guide to train operations to give your railroad purpose/li>
- Adding signaling
The most important part to running smoothly operating model trains is learning the fundamentals ahead of time. To avoid endless frustration due to derailments, erratic stops and not knowing the correct step-by-step process of building a model railroad, find a resource made specifically to help you understand the basics of model railroad construction. The best feeling in the world as a model railroader is enjoying a fully operation layout with all the bells and whistles.
To master the fundamental process of building a layout will take countless hours trying to figure out the exact steps for each part of the construction.
You must know the answers to each of the bullet points above to ensure your locomotives run smoothly, avoid costly mistakes and hours of frustration due to re-doing sections
Fortunately, you don’t have to spend hours and money with trial and error, here’s all everything you need to know packaged into one resource.
:YOU WILL ONLY SEE THIS PAGE ONCE. DON’T MISS THIS INCREDIBLE DEAL
Click Image to View Offer
WARNING: THIS DISCOUNT OFFER WILL EXPIRE
at 11:59 PM on
Today only, I’m offering a rare 48.5% discount on my popular Model Railroading How To system.
In the next 5 minutes you can get my entire system (pictured above) for 48.5% off the normal price
This complete Model Railroading How To System sells everyday for $97.00… Today you can save 48.5% and get the entire package for just $47!
Here’s what to do next:
Model trains is not necessarily an expensive habit but beginners who fall prey to the standard trial and error format of learning how to build model train layouts end up losing motivation due to the costs of making errors. Do not go down this route…spend a few bucks on a guide that will save you hundreds of dollars in the near future. This is the secret that will put you ahead of any other model train beginner and save you time, money and a whole lot of frustration.
In all of my years, I have found one resource that I’ve always recommended to the model train beginners I coach on a regular basis. It is the best beginner’s book I have ever come across.
In this book you will learn how to:
- Repair model trains so you don’t have to waste money and time at a hobby shop
- Maintain model trains to look as stunning as when you first acquired them
- Wire the perfect current flow so all of your trains run smoothly at a different speed. This is one of the secrets for creating the most realistic model train layout possible
- Convert DC to DCC and have intricate layouts with numerous trains on it, following their daily routes at varying speeds with no power issues
- Create terrain and buildings from scratch, this will help you to build the layout of your dreams and save you tons of money on buildings, which are some of the most expensive accessories of a model railroad
- Avoid common mistakes that every beginner makes that costs time, money and lots of frustration
- Find cheap model train stuff, so you can free up your budget to spend on additional details for your model railroad
- Build model train layout plans that will have your railroad looking display ready very quickly
- And a ton of other valuable information that would take 10 to 15 different books, sitting on forums threads filtering the amateur hour content from the real deal content from experts. Get all of the information you need to build a model train layout all in one place
I can honestly say that this information guide is the best investment for model train beginners and past railroaders.
The main benefit is the fact that an expert has put everything you ever need to know about building your first model train layout into one place and also provides a “members only” online library of video tips, tricks, and secrets.
It may set you back a few bucks but the information is so valuable that it comes with a 60 Day Money Back Guarantee. This guarantee allows you to get a complete refund if you don’t like it. No risk on your end sounds like a no brainer!
View Model Train Book for Beginners – what do you have to lose?
Sincerely,
James “Jim” Reynolds
Model Train Expert